TT-JZC-58 Fully Automatic Gel Layer Tester
I. Product Introduction:
TT-JZC-58 Fully Automatic Gel Layer Tester is a dedicated instrument for determining the gel layer index of bituminous coal (maximum thickness of gel layer Y, final contraction X, and volume curve). It meets all technical requirements and indicators of GB/T479-2016. The control system is controlled by an industrial computer, using high-speed data acquisition modules for data collection, with high control precision. The thickness of the gel layer is automatically detected by a robotic arm, with good stability, accurate recording and calculation, eliminating errors caused by manual line drawing, uneven line thickness, and manual drawing of gel layer curves.
II. Technical Features:
1. Fast measurement speed, high precision, wide measurement range
2. Fastest measurement speed among similar products, largest measurement range
3. Can measure high-speed zigzag coal and super-fat coal.
4. Automatically analyze the "displacement X value" curve, and measure the upper and lower layers of the gel layer according to the curve trend.
5. Electric heating furnace temperature controller adopts Yudian Technology AI intelligent temperature closed-loop control technology.
6. Fully automatic robotic arm control, automatic measurement, automatic calculation, automatic report generation.
7. Measurement results close to manual measurement results.
III. Technical Parameters:
1. Control time: 0～190min
2. Control range: 0～730℃, resolution 0.5℃.
3. Temperature control accuracy: between 250～730℃, temperature difference <±0.5℃.
4. Displacement X value measurement range: 0～100 mm, accuracy 0.3 mm.
5. Gel body Y value measurement range: 5～70 mm, accuracy 0.1 mm. (Largest measurement range among similar products)
6. Environmental requirements: temperature 15～40℃, humidity not greater than 80%, no strong magnetic field and no corrosiveness.
7. Load power: ≤8KW
8. Power supply voltage: AC220V±10% 50Hz
Performance | -28 Basic Edition | -58 Standard Edition | -78AI High-end Edition |
With robotic arm? | Yes | Yes | Yes |
Computer draws volume curve, smart robotic arm measures gel layer thickness Y value, Automatically draw upper and lower layer curves and calculate results | Yes | Yes | Yes |
Can measure Y value >45 super-fat coal, gel body Y value measurement range 5-70 mm, accuracy 0.1 mm | Yes | Yes | Yes |
Probe measures from starting position to bottom of coal cup within 20 seconds, can measure Z-shaped coal | Yes | Yes | Yes |
Whether to automatically pick and place volume sensor? | No | Yes | Yes |
Whether with automatic smoke exhaust function? | No | Yes | Yes |
Whether with automatic weight picking and placing function? | No | Yes | Yes |
Whether with intelligent image recognition probe one-key automatic alignment function? | No | No | Yes |
Whether equipped with dual brick stacks for automatic electric replacement? | No | No | Yes |
